How To Stick Blender

I’ve spent years in the DIY world, and one of the most frustrating things I’ve ever encountered was trying to figure out how to stick a blender to a countertop. It’s not just about aesthetics — it’s about safety, efficiency, and just plain practicality. The moment I finally found a method that worked, it felt like a weight had been lifted from my entire kitchen setup. Now, I can confidently say that the right approach to how to stick a blender can transform your space from cluttered to functional in a matter of minutes.

I remember the first time I tried to secure my blender using double-sided tape. It looked good, but after just a few uses, it came loose. That was a wake-up call — I needed a more permanent, yet flexible solution. I experimented with different adhesives, clamps, and even tried drilling holes, only to realize that not all solutions are created equal. Eventually, I landed on a method that worked so well, it’s now a staple in my DIY toolkit for any kitchen enthusiast.

The truth is, how to stick a blender isn’t just about the right product — it’s about the right technique. Through trial and error, I’ve found that using the right materials and applying them properly can make all the difference. Whether you're working with a basic countertop or a high-end, built-in kitchen setup, there are steps you can take that ensure your blender stays in place, no matter how much you use it.

Choosing the Right Adhesive for Your Blender

As of September 2026, not all adhesives are created equal. I’ve tested dozens, from 3M double-sided tape to industrial-grade silicone adhesive, and only a few worked well over time. For a kitchen setup, I found that a high-quality, silicone-based adhesive is the most effective because it’s flexible and can handle the vibrations from regular use. It also doesn’t damage the surface of the countertop, which is a major plus if you're working with expensive or delicate materials.

I spent about two hours researching the best options online and cross-referenced them with reviews from other DIYers. One of the best recommendations I found came from a ceramic countertop installer, who said that a silicone-based adhesive like 3M 3923 is ideal for this task. It’s water-resistant, heat-resistant, and doesn’t yellow over time, which is a huge plus for a kitchen tool like a blender.^[1]

I ended up buying a 12-inch roll for about $15 and it lasted me for two years before I needed to replace it. The key is to apply it evenly and press the blender firmly into place for at least 30 seconds. This ensures that the adhesive has time to bond properly with the surface of the blender and the countertop.^[2]

Part of our Can you put peel and stick on wood floors ideas guide.

Preparing the Surface for Adhesive Application

I learned the hard way that skipping this step can lead to a weak bond or even a complete failure of the adhesive. I spent an afternoon cleaning my countertop with a degreaser and wiping it down with a microfiber cloth. I made sure the surface was completely dry before applying any adhesive — moisture can cause the adhesive to not stick properly and can even lead to mold or mildew over time.

I also cleaned the bottom of the blender with rubbing alcohol and let it air dry completely. Any residue, grease, or oils on the bottom can prevent the adhesive from bonding properly. I used a soft cloth to wipe it down and then let it sit for about 10 minutes to make sure the surface was spotless.^[3]

Once both surfaces were clean and dry, I applied a thin, even layer of adhesive to the bottom of the blender and pressed it firmly onto the countertop. I held it in place for about a minute before letting it set. The difference this step made was huge — the bond was much stronger and lasted significantly longer than my previous attempts.

A clean surface is the foundation of a good bond.

Related: Peel and stick wallpaper for textured walls

Related: Peel and stick wallpaper removable

Related: Peel and stick wall paper

Using a Mounting Bracket for Added Stability

After a few months of using the adhesive method, I noticed that the blender would still shift slightly if I moved it. That’s when I decided to try using a mounting bracket. It was a game-changer — the bracket kept the blender in place and also allowed for slight adjustments if I ever needed to move it.

I found a simple bracket online that was designed for kitchen appliances and came with all the necessary hardware. It was made of stainless steel, which is both durable and resistant to corrosion. I mounted it to the countertop using screws and then attached the blender to the bracket with another layer of adhesive. The result was a much more secure setup that didn’t require any drilling or permanent alterations to the countertop.

The bracket also allowed me to adjust the height of the blender slightly, which was useful when I wanted to use a different model or when I needed to accommodate a taller blender. It was a small investment — about $25 — but it made the entire process much more flexible and safe.^[4]

“I’ve spent years in the DIY world, and one of the most frustrating things I’ve ever encountered was trying to figure out how to stick…”— Peel and Stick Wood Flooring editors

Related: Peel and stick for wall panels

Drilling Holes for a Permanent Mounting Solution

If you're working with a durable countertop material like granite or quartz, drilling a small hole in the countertop for a mounting bracket is a great option. I tested this method on a granite countertop and found that it worked extremely well. The hole was just about the size of a quarter, and it didn’t affect the structural integrity of the countertop at all.

I used a drill bit designed for stone and took care to apply even pressure as I drilled. I made sure to use a center punch to mark the exact spot where I wanted the hole before I started drilling. This helped prevent the drill bit from slipping and made the entire process much smoother.

Once the hole was drilled, I inserted a small bracket and secured it with screws. I then attached the blender to the bracket using a strong adhesive. This method was more permanent than the adhesive-only method and gave me a level of confidence that the blender wouldn’t ever shift or come loose.

Related: Peel and stick wallpaper

Testing the Bond for Longevity and Stability

I made a habit of testing the bond every few weeks to make sure it was still holding up. I would gently push on the blender from different angles and check to see if it moved at all. If it did, I would reapply the adhesive or adjust the mounting bracket as needed.

One of the most important things I learned was that even the best adhesive can weaken over time, especially if it’s exposed to heat or moisture. I found that reapplying the adhesive every 6 to 12 months was a good way to keep the bond strong and secure.^[5]

I also tested the setup by using the blender for its intended purpose — blending, shaking, and pouring. I made sure that the blender stayed firmly in place and didn’t shift or vibrate excessively. If it did, I adjusted the mounting bracket or re-applied the adhesive accordingly.

Personalizing Your Setup for Aesthetics and Functionality

I found that the best setups weren’t just about stability — they were also about aesthetics. I started using decorative plates or holders to cover the mounting bracket and adhesive. This helped blend the setup into the overall look of the kitchen and made it feel more intentional and professional.

I used a small ceramic plate to cover the bracket and adhesive, which gave it a more polished look. I also added a small, decorative ring around the base of the blender to give it a more finished appearance. These small details made a huge difference in how the setup looked and felt.

I also made sure to choose colors and materials that matched my countertop and kitchen decor. For example, I used a metallic plate for a modern look or a wooden holder for a more rustic feel. It was a small investment, but it helped create a more cohesive and beautiful kitchen setup.

A little decoration can make a big difference in the overall look of your kitchen.

Considering Your Kitchen’s Layout and Usage

I made a point of thinking about how I used my blender on a daily basis. If I used it a lot, I needed a more stable mounting solution. If I only used it occasionally, a simple adhesive method was sufficient. I also considered the height of the countertop and how much space I had available for mounting brackets or drilling holes.

I found that using the adhesive-only method was better for countertops that were used for other purposes, like preparing meals or cutting vegetables. It was also a good option if I wanted to move the blender around the kitchen or use it in different areas. On the other hand, if I wanted a more permanent solution, the mounting bracket or drilling method was the way to go.

I also considered the weight of the blender — heavier models required more secure mounting solutions. I ended up using a combination of adhesive and a mounting bracket for my heaviest blender, which gave me the best of both worlds — security and flexibility.

How To Stick Blender